POUS00CZE Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : Milada Cajthamlova
Date Prepared : 2020-02-19
Report Type : UPDATE
If Update:
Previous Site Log : pous00cze_20190417.log
Modified/Added Sections : 11
1. Site Identification of the GNSS Monument
Site Name : Poustka
Nine Character ID : POUS00CZE
Monument Inscription : CONCRETE PILLAR
IERS DOMES Number : 11518M001
CDP Number : (A4)
Monument Description : PILLAR ON THE BUILDING ROOF
Height of the Monument : 11.8 m
Monument Foundation : SUPPORTING INTERNAL CONCRETE WALL
Foundation Depth : (m)
Marker Description : BRASS PLATE WITH SCREW
Date Installed : 2003-10-20T12:00Z
Geologic Characteristic : IGNEOUS
Bedrock Type : IGNEOUS
Bedrock Condition : FRESH
Fracture Spacing : over 200 cm
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : BUILDING FOUNDED ON BEDROCK
2. Site Location Information
City or Town : Poustka
State or Province : Karlovy Vary Region
Country or Region : CZE
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 4002424.800
Y coordinate (m) : 872512.900
Z coordinate (m) : 4873111.700
Latitude (N is +) : +500818.36
Longitude (E is +) : +0121752.28
Elevation (m,ellips.) : 572.2
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : ASHTECH Z18
Satellite System : GPS+GLO
Serial Number : ZX420024104
Firmware Version : ZT16 0065
Elevation Cutoff Setting : 5 deg
Date Installed : 2003-10-20T12:00Z
Date Removed : 2005-03-24T18:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : (multiple lines)
3.2 Receiver Type : ASHTECH Z-XII3
Satellite System : GPS
Serial Number : 05093
Firmware Version : 1C63-6J00
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-03-24T18:00Z
Date Removed : 2005-04-15T10:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : Temporaly changed since ASHTECH Z18
: will be repared.
3.3 Receiver Type : ASHTECH UZ-12
Satellite System : GPS
Serial Number : 200502053
Firmware Version : 0A12-UA00
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-04-15T10:00Z
Date Removed : 2005-08-09T16:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : Temporal change until return of Z18
: installed receiver Z-MAX not accepted
: in rcvr_ant.tab
3.4 Receiver Type : ASHTECH Z18
Satellite System : GPS+GLO
Serial Number : ZX420024104
Firmware Version : ZT16 0065
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-08-09T16:00Z
Date Removed : 2005-08-31T12:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : (multiple lines)
3.5 Receiver Type : TPS GB-1000
Satellite System : GPS+GLO
Serial Number : T222427
Firmware Version : 2.5 Apr,07,2005 p1b1
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-08-31T12:00Z
Date Removed : 2009-09-30T07:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : NONE
3.6 Receiver Type : TPS GB-1000
Satellite System : GPS+GLO
Serial Number : 8QKMDE527LS
Firmware Version : 3.3 Dec,22,2008 p6
Elevation Cutoff Setting : 5 deg
Date Installed : 2009-09-30T07:00Z
Date Removed : 2012-04-16T11:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : NONE
3.7 Receiver Type : TPS GB-1000
Satellite System : GPS+GLO
Serial Number : 8QKMDE527LS
Firmware Version : 3.5 Dec,24,2010
Elevation Cutoff Setting : 0 deg
Date Installed : 2012-04-16T11:00Z
Date Removed : 2019-04-11T00:00Z
Temperature Stabiliz. : 15.0 +/- (deg C)
Additional Information : NONE
3.8 Receiver Type : TPS GB-1000
Satellite System : GPS+GLO
Serial Number : 8QKMDE527LS
Firmware Version : 3.5 Feb,01,2019 p5
Elevation Cutoff Setting : 0 deg
Date Installed : 2019-04-11T00:01Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : ASH701946.2 SNOW
Serial Number : CR320023102
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0510
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : Orig. Ashtech suppl., BELDEN 8214 BRAID RG-8
Antenna Cable Length : 10 m
Date Installed : 2003-10-20T12:00Z
Date Removed : 2005-03-17T13:00Z
Additional Information : (multiple lines)
4.2 Antenna Type : ASH701946.2 SNOW
Serial Number : CR320023101
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0520
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : Orig. Ashtech suppl., BELDEN 8214 BRAID RG-8
Antenna Cable Length : 10 m
Date Installed : 2005-03-17T13:00Z
Date Removed : 2005-08-31T12:00Z
Additional Information : (multiple lines)
4.3 Antenna Type : TPSCR3_GGD CONE
Serial Number : 2170404
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0220
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : Orig. Ashtech suppl., BELDEN 8214 BRAID RG-8
Antenna Cable Length : 10 m
Date Installed : 2005-08-31T12:00Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : (multiple lines)
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2003-10-20/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Academy of Sciences of the Czech Republic
: Institute of Rock Structure and Mechanics
: Department of Engineering Geology
Preferred Abbreviation : IRSM CAS
Mailing Address : V Holesovickach 41
: CZ-182 09 Praha 8
: Czechia
Primary Contact
Contact Name : Zdenek Fucik
Telephone (primary) : +420 266 009 362
Telephone (secondary) :
Fax : +420 284 680 105
E-mail : fucik@irsm.cas.cz
Secondary Contact
Contact Name : Mr. Jan Balek
Telephone (primary) : +420 266 009 365
Telephone (secondary) :
Fax :
E-mail : balek@irsm.cas.cz
Additional Information : Third Contact
: Ing. Jan Balek
: +420 266 009 365
: balek@irsm.cas.cz
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center :
URL for More Information : N/A
Hardcopy on File
Site Map : N/A
Site Diagram : N/A
Horizon Mask : N/A
Monument Description : N/A
Site Pictures : N/A
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
ASH701946.2
+---+ <-- 0.1400
/ \
/ + \ <-- 0.1284 L2
| + | <-- 0.1098 L1
+-------------------------------------------------+ <-- 0.1010 TCR
| |
| |
| |
| |
+-+-------------------------------------------------+-+ <-- 0.0380
+-------------------+-------------+-------------------+ <-- 0.0350 BCR
| |
| |
+------x------+ <-- 0.0000 BPA=ARP
<-- 0.380 -->
Monument => +-----------------------+ <-- 0.40
| 0.40 |
| |
| |
| Concrete Pillar |
| |
| |
| |
| |
| |
| |
| |
Roof of the | |
building => ---+ +--- <-- 0.00
ARP: Antenna Reference Point
L1 : L1 Phase Center L2 : L2 Phase Center
TCR: Top of Chokering BCR: Bottom of Chokering
TGP: Top of Ground Plane BGP: Bottom of Ground Plane
BPA: Bottom of Preamplifier
TPSCR3_GGD CONE
+---+
/ \
/ + \ <-- 0.1027 L2
| + | <-- 0.0803 L1
+-------------------------------------------------+ <-- TCR
| |
| |
| |
| |
+-+-------------------------------------------------+-+
+-------------------+-------------+-------------------+ <-- 0.0030 BCR
| |
| |
+------x------+ <-- 0.0000 BPA=ARP
<-- 0.326 -->
Monument => +-----------------------+ <-- 0.40
| 0.40 |
| |
| |
| Concrete Pillar |
| |
| |
| |
| |
| |
| |
| |
Roof of the | |
building => ---+ +--- <-- 0.00
ARP: Antenna Reference Point
L1 : L1 Phase Center L2 : L2 Phase Center
TCR: Top of Chokering BCR: Bottom of Chokering
TGP: Top of Ground Plane BGP: Bottom of Ground Plane
BPA: Bottom of Preamplifier
