SASS00DEU Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : GREF Operator DLZ (dlz@bkg.bund.de)
Date Prepared : 2022-09-05
Report Type : UPDATE
If Update:
Previous Site Log : sass00deu_20211108.log
Modified/Added Sections : 11
1. Site Identification of the GNSS Monument
Site Name : Sassnitz
Nine Character ID : SASS00DEU
Monument Inscription :
IERS DOMES Number : 14281M001
CDP Number : (A4)
Monument Description : STEEL TRIPOD
Height of the Monument : 2.0 m
Monument Foundation : STEEL TRIPOD ANCHORED TO THE TOWER
Foundation Depth : (m)
Marker Description : SURVEY MARKER BOLT ON STEEL TRIPOD
Date Installed : 2002-12-12T12:00Z
Geologic Characteristic : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc)
Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY)
Bedrock Condition : (FRESH/JOINTED/WEATHERED)
Fracture Spacing : (0 cm/1-10 cm/11-50 cm/51-200 cm/over 200 cm)
Fault zones nearby : (YES/NO/Name of the zone)
Distance/activity : (multiple lines)
Additional Information : Survey Marker Bolt on a steel tripod,
: fastened on the platform on the top
: of the tower in the harbour of Sassnitz.
: The Survey Marker Bolt is 31 m above
: the ground.
2. Site Location Information
City or Town : Sassnitz Island of Ruegen
State or Province : Mecklenburg-Vorpommern
Country or Region : DEU
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3606146.380
Y coordinate (m) : 875303.140
Z coordinate (m) : 5170194.740
Latitude (N is +) : +543048.93
Longitude (E is +) : +0133835.84
Elevation (m,ellips.) : 69.0
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AGL2LHV3XMO
Firmware Version : E_GGD_2/2.2
Elevation Cutoff Setting : 5 deg
Date Installed : 2002-12-12T12:00Z
Date Removed : 2003-01-24T12:00Z
Temperature Stabiliz. : none
Additional Information : Addition Number
: 235-0281 on the
: type level
3.2 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : E_GGD_2/2.2
Elevation Cutoff Setting : 5 deg
Date Installed : 2003-01-24T12:00Z
Date Removed : 2003-12-05T10:00Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: LE 5772 on the
: type level
3.3 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : E_GGD_2/2.3P3
Elevation Cutoff Setting : 5 deg
Date Installed : 2003-12-05T10:00Z
Date Removed : 2005-04-25T09:00Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: LE 5772 on the
: type level
3.4 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : E_GGD_2/2.3p4
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-04-25T09:00Z
Date Removed : 2006-05-22T14:00Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: LE 5772 on the
: type level
3.5 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : E_GGD_2/2.5P1
Elevation Cutoff Setting : 0 deg
Date Installed : 2006-05-22T14:00Z
Date Removed : 2007-05-11T07:00Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: LE 5772 on the
: type level
3.6 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : 2.6.0 APR,18,2007
Elevation Cutoff Setting : 0 deg
Date Installed : 2007-05-11T07:00Z
Date Removed : 2008-01-25T11:15Z
Temperature Stabiliz. : none
Additional Information : Additional Number
: LE 5772 on the
: type level
3.7 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AEAEYZVWY68
Firmware Version : 2.6.1 JAN,10,2008
Elevation Cutoff Setting : 0 deg
Date Installed : 2008-01-25T11:15Z
Date Removed : 2019-02-28T23:59Z
Temperature Stabiliz. : none
Additional Information : Additional Number LE 5772 on the type level
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : TPSCR3_GGD CONE
Serial Number : 00106
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.1850
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : Aircom plus
Antenna Cable Length : 50 m
Date Installed : 2002-12-12T12:00Z
Date Removed : 2003-10-23T07:00Z
Additional Information : (multiple lines)
4.2 Antenna Type : TPSCR3_GGD CONE
Serial Number : 217 0155
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.1850
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : Aircom plus
Antenna Cable Length : 50 m
Date Installed : 2003-10-23T07:00Z
Date Removed : 2004-08-24T12:00Z
Additional Information : (multiple lines)
4.3 Antenna Type : TPSCR3_GGD CONE
Serial Number : 217 0155
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0310
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : Aircom plus
Antenna Cable Length : 50 m
Date Installed : 2004-08-24T12:00Z
Date Removed : 2019-02-28T23:59Z
Additional Information : (multiple lines)
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2002-12-12/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : PT35108
Manufacturer : Vaisala Oyi
Serial Number : X321
Data Sampling Interval : 900 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : 0.5 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2002-12-12/2006-07-26
Notes : The humidity sensor is 0.5 m
: below the antenna.
8.1.2 Humidity Sensor Model : HMP45A-P
Manufacturer : VAISALA Oyi
Serial Number : A2110013
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 2 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : 0.5 m
Calibration date : 2005-05-23
Effective Dates : 2006-07-26/CCYY-MM-DD
Notes : The humidity sensor is 0.5 m
: below the antenna.
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : PTU
Manufacturer : Vaisala Oyi
Serial Number : X2930001
Data Sampling Interval : 900 sec
Accuracy : 0.1 hPa
Height Diff to Ant : 29.4 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2002-12-12/2006-07-26
Notes : The pressure Sensor is
: 29.4 m below the antenna.
8.2.2 Pressure Sensor Model : PTU200
Manufacturer : VAISALA Oyi
Serial Number : W5110012
Data Sampling Interval : 10 sec
Accuracy : 0.1 hPa
Height Diff to Ant : -29.4 m
Calibration date : 2002
Effective Dates : 2006-07-26/CCYY-MM-DD
Notes : The pressure Sensor is
: 29.4 m below the antenna.
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : PT35108
Manufacturer : Vaisala Oyi
Serial Number : X321
Data Sampling Interval : 900 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : 0.5 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2002-12-12/2006-07-26
Notes : The temperature sensor is
: 0.5 m below the antenna.
8.3.2 Temp. Sensor Model : HMP45A-P
Manufacturer : VAISALA Oyi
Serial Number : A2110013
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : 0.5 m
Calibration date : 2005-05-23
Effective Dates : 2006-07-26/CCYY-MM-DD
Notes : The temperature sensor is
: 0.5 m below the antenna.
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Bundesamt fuer Kartographie und Geodaesie
: Department of Geodaesie
Preferred Abbreviation : BKG
Mailing Address : Richard-Strauss-Allee 11
: D-60598 Frankfurt a.M.
: Germany
Primary Contact
Contact Name : GREF Operator
Telephone (primary) : +49 341 5634410
Telephone (secondary) : +49 341 5634432
Fax : +49 341 5634415
E-mail : operator.gref@bkg.bund.de
Secondary Contact
Contact Name : BKG GNSS Data Center
Telephone (primary) : +49 69 6333274
Telephone (secondary) : +49 69 63331
Fax : +49 69 6333425
E-mail : bkg-gdc@bkg.bund.de
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BEV
URL for More Information : gref.bkg.bund.de
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : Y
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
Topcon Positioning Systems: TPSCR3_GGD
---------
/ + \ <-- 0.104 L2
| + | <-- 0.081 L1
+--------------------------------------------------+ <-- 0.071 TCR
| |
| |
| |
| |
+-----------------+-------------+------------------+ <-- 0.003 BCR
+-----x-----+ <-- 0.0 BPA=ARP
+---+
| |
| |
| |
| |
| |
| |
+---+
+---------+---+----------+ <-- -0.0310
ARP: Antenna Reference Point
L1 : L1 Phase Center L2 : L2 Phase Center
TCR: Top of Chokering BCR: Bottom of Chokering
TGP: Top of Ground Plane BGP: Bottom of Ground Plane
